Aluminum Wheels ~ Chrome  Bumpers~ Grilles~ Handles~ Marine Railings~ Chrome Covers~
Ornaments~ Lights~ Aluminum Covers~ Brass Fixtures~ Stainless Steel~
Glisten PC is a high gloss, rock hard,
water-clear topcoat that was engineered especially for use with
aluminum, chrome, brass and stainless steel. Apply over existing
paint, even glossy surfaces.
Spray or brush application with no brush marks
.
Will dry in less than 1 hour; complete maximum cured
hardness in 48 hours.
Has tensil strength 2 to 3 times to other coatings.     * USE WITH AP-120
POR-15 Paint
POR-15 Pint :      48 sq ft
POR-15 Quart:    96 sq ft
POR-15 Gallon: 384 sq ft
     Coverage is Approximate
POR-15 Solvent
Especially formulated for the thinning of POR-15 paints.
Use for easy clean-up.
Metal Mask
Heat Resistant Paint
POR-20~  Black Velvet~  Factory Manifold Gray
Pelucid
Custom Product Sales
Color
POR-15 Paint Pt $27.25
Color
$130.00
POR-15 Paint Gal
POR-15 paint applied right onto rusty surfaces will dry to a rock-hard finish and will not crack, chip, or peel. POR-15 cures by drawing moisture from the air making a perfect paint for rusty frames, floorpans, farm equipment, underwater marine items and battery trays. Use POR-15 on anything that you want to protect permanently from rust.
Color
6 Pk 4oz POR-15 $45.75
Topcoats Pint
POR-15 Topcoats highly flexible, non-porous, extremely scratch and chip resistant and are non-uv sensitive.
Pint
$26.75
Choose One
A high temperature paint capable of withstanding extreme temperatures. With proper application and curing POR-15 Hi-temp paint won't burn off and maintains a rich color.
Engine Enamel
Pint Only
POR-15 Engine Enamel is formulated with extra pigments for better coverage and richer color that lasts longer.
$22.00
Pint
Color Choice
$11.00
Solvent Qt
Metal Mask is an extremely tough enamel and close in-color to bare cast iron. The finish is chip and scratch resistant perfect for undercarriages and hood springs.
Metal Mask 8oz
$15.25
Metal Mask Pt
$25.75
Metal Mask Qt
$44.00
Glisten PC Pt
$33.00
Glisten PC Qt
$55.00
WhiteCote Pt
$33.00
WhiteCote Qt
$54.75
WhiteCote Gal
$188.00
WhiteCote is a tough glossy, two-part coating for use over primed or painted surfaces. WhiteCote, when cured, leaves a rock-hard, chemical resistant, non-porous gloss white finish. Can be brushed or sprayed.
WhiteCote
Color
$40.75
POR-15 Paint Qt
Pelucid is a non-yellowing single part clear coat for applying over painted or unpainted fiberglass, wood and other interior surfaces. It may be applied by brush or sprayed. The tough flexible coating dries crystal clear, leaving a rock-hard finish that will not chip, crack or peel. Pelucid is self-leveling and withstands temperatures up to 400 degrees. Recommeded for indoor applications.
Pelucid 8oz
$15.50
Pelucid Pt
$24.25
Pelucid Qt
$42.00
AP-120 Metal Prep
Use AP-120 for the ultimate clear finish on polished metal. Specially formulated to be used with Glisten PC for the proper preparation of alloys and brass.
AP-120 Metal Prep 20oz
$11.00
AP-120 Metal Prep Gal
$35.25
Hi-Temp Paint Pt
$31.00
GLISTEN PC for Outdoor Applications                               
PELUCID  for Indoor Applications
Hi Temp Paint 8oz
$19.00
Choose One